Guangdong Chuang Sanfeng Insulation Material Co

The first product name (English name of polyetherimide, abbreviated as amber transparent solid, has inherent flame retardancy and low smoke without adding any additives, oxygen index is , combustion grade is grade, density is. It has Strong high-temperature stability, even if it is non-reinforced, it still has good toughness and strength. Therefore, the superior thermal stability can be used to make high-temperature and heat-resistant devices. It has excellent mechanical properties, electrical insulation properties, and radiation resistance. performance, high and low temperature resistance and wear resistance, and can pass through microwaves and has good flame retardancy, resistance to chemical reactions and electrical insulation properties. The glass transition temperature is very high, reaching ℃. It also has a very low shrinkage and good Mechanical properties in equal directions. Adding glass fiber, carbon fiber or other fillers can achieve the purpose of enhanced modification. It can also be combined with other engineering plastics to form a heat-resistant polymer alloy, which can be used for a long time at a working temperature of ~℃. It is an amorphous High-performance polymers not only have high mechanical performance, but also have excellent heat resistance and chemical stability. The continuous use temperature is about (℃), as well as high dimensional stability and creep strength. It has unique torsional strength among its thermoplastics. , making it a cheap alternative to small steel cutting parts. It has the characteristics of extremely high strength and stiffness, excellent dimensional stability, excellent chemical resistance, hydrolysis resistance, high thermal deformation resistance, and is not restricted by weather conditions. It has good flame retardancy, low smoke emission, physical inertness (suitable for contact with food) and good electrical insulation properties
Second characteristics
The name (polyetherimide) is amber and transparent It is solid, has good flame retardancy and low smoke, and has a combustion rating of Grade 1.
It has strong high temperature stability, with a heat deformation temperature of ℃, and can be used for a long time at an operating temperature of 1℃.
/> Very good solution stability, high temperature resistance, and steam resistance
Etherimide has good resistance to ultraviolet rays and rays.
Third, it is a thermoplastic engineering resin with good stability and performance
One of the outstanding properties of the grease is its ability to withstand long-term high temperature testing. This high heat resistance, coupled with excellent flammability and laboratory certification, enables the resin to meet the stringent requirements of high temperature applications.
Ductility) Resin Not only does it have an unparalleled combination of high strength and high modulus, it also has outstanding ductility. Its yield-stretch extension allows it to freely incorporate a variety of snap-fit designs for easy assembly. Even when only glass fiber reinforcement is added, the resin remains ductile at temperatures ranging from sub-zero to ℃.
Impact Strength) The resin has excellent practical impact resistance. Given that the resin exhibits notch sensitivity, it is recommended to adhere to standard design principles. Concentration points of applied forces in injection molded parts, such as sharp corners, should be minimized to provide maximum impact strength. *The resin is designed for applications requiring high impact performance. This series has notched impact up to /з.
Resistance Fatigue) For cyclic loading or swing components, fatigue is an important design consideration.
Creep Behavior) When considering the mechanical properties of any thermoplastic, designers must recognize the effects of temperature, stress levels and load duration on material properties. The resin also exhibits excellent creep resistance at temperatures and stress levels where many other thermoplastics cannot be used.
Grease has excellent electrical properties and remains stable over a wide range of environmental conditions. This, combined with thermal and mechanical properties, makes the resin ideal for demanding electronic and electrical applications.
Relative permittivity) Although applications may require higher or lower absolute values of the relative permittivity, it is important that these values remain stable over the entire range of operating temperature and/or frequency.
Resin is a high performance amorphous engineering thermoplastic. Resin is inherently flame retardant and produces low smoke. Some resin grades exhibit high dielectric constants and high dissipation factors over a wide range of temperatures and frequencies. As an amorphous thermoplastic polyetherimide resin, it combines high performance with excellent processing characteristics, combining high heat resistance with high strength, modulus and broad chemical resistance.
Four fields of use
Replacing metal in manufacturing optical fiber connectors can optimize the component structure, simplify its manufacturing and assembly steps, and maintain more precise dimensions. It is used in the automotive field, such as manufacturing high-temperature connectors, producing high-power lights and indicators, sensors to control the temperature outside the car cabin, and sensors to control the air and fuel mixture. It can also be used as a vacuum pump impeller that is resistant to high temperature lubrication and erosion, a ground glass joint (socket interface) for a distiller operating at ℃, and a reflector for non-illuminated anti-fog lamps.
Five-purpose tableware/public catering industry, medical equipment, telecommunications, molded interconnects, automotive lighting, aviation machinery internal components,/fluid handling
Specifications: sheet thickness*width*length～*/*/
Rod ~*
Color: tea red (amber), translucent, black, blue, red, brown
Origin: Germany, Switzerland, the United States